EagleTac M25C2 KIT XM-L2 965 Lumens


Availability: Low Stock 2 Remaining

Low Stock 2 Remaining

Regular Price: $139.90

Special Price $69.95




LEDs soldered directly to copper for maximum heatsink effectiveness
User replaceable glass lens
Customizable energy saving feature
Battery reverse polarity protection
Tail stand capability with included tail stand boot

Base Model Includes:
Spare O-rings
Titanium coated stainless steel pocket clip
Tail-stand rubber boot
Soft cigar holding grip
Cigar grip cover ring
Lanyard attachment ring
Mil-spec paracord lanyard w/ quick attachment clip

Kit Includes:

Stainless Steel Bezel
3 cells extension body tube for three CR123A/RCR123A
4 cells extension body tube for four CR123A or two 18650 li-ion
Battery spacer for 3 cell and 4 cell extension tube 

LED: Cree XM-L2
Modes: 7 / 86 / 449 / 980 lumens
Runtime: 100h+ / 11h / 1.9h / 1h
Beam Distance: 498 meters
Battery Type: 1 x 18650 / 2 x (R)CR123A / 2 x 18650 / 3 x (R)CR123A / 4 x CR123A 

Length: 6.9in
Body Diameter: 1in
Head Diameter: 2.5in
Weight: 10.4oz (without batteries) 


Tactical forward clicky switch

Basic - Turn on the light by press and release the on/off button switch ( For momentary on, press and hold the button switch for immediate output.
Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.

To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd or 4th level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.

(Programmable Features) Mode switching: To switch between tactical and regular mode (default), switch to the 2nd output level and turn the flashlight on and off for 20 times.

(Programmable Features) Tail strobe (off by default). With this enabled, you can access strobe output at the tailcap switch button by double pressing the switch (within one second). To enable or disable this function, switch to the 1st level and turn the flashlight on and off 20 times.

(Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 24% after 200 seconds at turbo mode. With the feature turned off output is reduced by 9% instead. To toggle this feature, turn on the flashlight at 4th level and turn the flashlight on and off 29 times. Once setting has been changed, LED will output for 3 seconds at 100% if it is enabled, or for 1 second at 100% if disabled.