FREE SHIPPING ON DOMESTIC ORDERS OVER $75

Welcome

Lumintop FW21 X9L Aluminum Flashlight SBT90.2 6500 Lumens Cool White Flashlight

SKU:FW21 X9L

Availability: Low Stock 2 Remaining

Low Stock 2 Remaining

$119.95

PRODUCT DETAILS

 PLEASE NOTE: THIS FLASHLIGHT IS NOT A TOY, EXTREME TEMPERATURES CAN CAUSE BURNS, PLEASE EXERCISE CAUTION WHEN LENDING THIS PRODUCT OUT TO OTHER PEOPLE, OR WHEN STORING IT WITH A BATTERY

 

Toykeeper developed and supports Anduril, the firmware and interface onboard the FW3A. She is also responsible for many of the other firmware and interfaces behind popular BLF projects. Please visit her Patreon and support her hard work!

Specifications:
Emitter: Luminus SBT90.2 LED (Cool White)
Reflector: Smooth Reflector
Lens: Glass with AR coating
Max Output: 
     ~6,500
Peak Beam Intensity: 
     ~163,800 candela / ~810 meters throw 

The FW21 X9L will thermally throttle based on a preset and programmable maximum temperature (Default 45C, temperature sensor should be calibrated before use, refer to manual below for instructions) for the first 10 seconds it will run unchecked then throttle itself.

Constant reactivation of turbo mode can easily cause the flashlight to EXCEED safe operating temperatures.

Special Modes:
Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm

Driver: FET+7+1 driver. Low parasitic drain while OFF
Firmware: The FW21 PRO uses free software called Andúril programmed by ToyKeeper of BLF, distributed under the terms of the GPL v3. The code is available at http://tiny.cc/TKAnduril
Body: Aluminum with hard-coat anodizing
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX8
Battery: One flat-top or button-top high discharge (>10A) unprotected 21700 cell (max length 70.5mm). Battery is NOT included. 
Recommended batteries: 18650: Sanyo GA, Samsung 35E, 21700: Samsung 30T
Weight: ~126.3g (4.46oz) without battery 
Size: 40.2mm (1.58") head diameter, 123.5mm (4.86") length, 25.2mm (0.99") body tube diameter

User interfaces and features: 
By default the FW21 X9L is set to use Smooth Ramping for mode changing
Direct access to turbo mode shortcut.
A more conventional Stepped Ramping UI is available if you prefer discrete modes level. (Number of steps is configurable)
Momentary mode useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
Muggle mode uses reduced output and features
Electronic lockout for safety and low momentary.

ANDURIL QUICK REFERENCE SHEET:

THE PINK HIGHLIGHTED AREA IS THE PATH TO CONFIGURE THE TEMPERATURE SENSOR

MANUFACTURED BY :

Lumintop