Zebralight H502 L2 Cool White


Availability: Low Stock 3 Remaining

Low Stock 3 Remaining



Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
All levels are current regulated
Low battery alert when the light is switched OFF and the battery voltage is below 1.06V
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness level
Precision machined unibody casing from premium grade  aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Tempered optical grade glass
Waterproof to IPX7 (2 meters, 30 minutes)
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain

LED: Cree XM-L2 Cool White (Nominal CCT 6300K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.

Light Output (runtimes)

  • High:         H1 278 Lm (0.9 hrs)   or    H2  171 Lm (1.9 hrs) / 107 Lm (3.3 hrs)
  • Medium:    M 53 Lm (7.5 hrs)    or    M2   27 Lm (12 hrs) / 13 Lm (27 hrs)
  • Low:         L1   2.9 Lm (4 days)   or    L2   0.36 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months)
  • Beacon Strobe Mode:  4Hz Strobe at H1 / 19Hz Strobe at H1

Light output are ANSI out the front (OTF) values. Runtimes tests are done using Sanyo 2000mAh Eneloop AA batteries
Operating Voltage Range: 0.7V - 4.2V
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type

  • Flood, with 120 degree beam spread

Head Diameter: 0.84 inch (21.3 mm)
Length: 2.76 inch (70.1 mm)
Weight: 1 oz (29 gram), 2 oz (55 gram) with an Eneloop AA, 2.8 oz (78 gram) with an Eneloop AA and headband.