FREE SHIPPING ON DOMESTIC ORDERS OVER $75

Welcome

Lumintop EDC18 2800 lumen EDC Side Switch Flashlight

SKU:EDC18

Availability: Low Stock 6 Remaining

Only 6 left

Product Name Qty
6
Low Stock 6 Remaining

PRODUCT DETAILS

GITD GASKETS AVAILABLE HERE.
OTHER FW3A ACCESSORIES WILL NOT FIT.

CARCLO OPTICS WILL NOT FIT WITHOUT ADDITIONAL GLASS LENS IN FRONT

The EDC18 is a derivative of the joint community project by flashlight forums TLF & BLF. Brought to production by Lumintop. This ultra-compact flashlight is only 3.70" (93.9mm) in length yet can deliver a maximum of 2800 lumens (XP-L HI) with a single 18650 battery (>10A capable battery, flat top unprotected). The electronic side switch controls various functions including smooth ramping, stepped mode settings, strobe, and other unique special modes. 

PLEASE NOTE: THIS FLASHLIGHT IS NOT A TOY, EXTREME TEMPERATURES CAN CAUSE BURNS, PLEASE EXERCISE CAUTION WHEN LENDING THIS PRODUCT OUT TO OTHER PEOPLE, OR WHEN STORING IT WITH A BATTERY

Toykeeper developed and supports Anduril, the firmware and interface onboard the EDC18. She is also responsible for many of the other firmware and interfaces behind popular BLF projects. Please visit her Patreon and support her hard work!

Features:

  • Max 2800 lumens with CREE XP-L HI
  • Lighted electronic side switch
  • Magnetic Tailcap
  • Customizable Anduril firmware

Specifications:
Emitters: 3 x LEDS on Copper DTP MCPCB 
     Cree XP-L HI 1A (Cool White 6500K)
     Cree XP-L HI 3D (Neutral White 5000K)

Optic: Triple TIR Optic (Non-Carclo, Carclo swap will not fit without additional glass lens)
Max Output: 
     ~2,800 lumens (XP-L HI)
     ~1,600 lumens (SST-20)
     ~1,600 lumens (Nichia 219C)
Peak Beam Intensity: ~10,000 candela / ~200 meters throw (XP-L Hi)

Modes and Runtime (XP-L HI)*:

Moonlight ~0.2 lumens (~74 days)
1 x 7135 Max: ~130 lumens (10 hours)
8 x 7135 Max: ~900 lumens (1.25 hours)
Max FET: ~2800 lumens (**10 second stepdown due to heat)
*Modes and runtime based on Samsung 35E 3500mAh under ideal conditions. Actual max output and runtime depend heavily on battery condition, voltage, and ambient temperature. 
**The EDC18 will thermally throttle based on a preset and programmable maximum temperature (Default 45C, temperature sensor should be calibrated before use, refer to manual below for instructions) for the first 10 seconds it will run unchecked then throttle itself.

Constant reactivation of turbo mode can easily cause the flashlight to EXCEED safe operating temperatures.

Special Modes:
Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm

Driver: FET+7+1 driver. Low parasitic drain while OFF
Firmware: The FW3A uses free software called Andúril programmed by ToyKeeper of BLF, distributed under the terms of the GPL v3. The code is available at http://tiny.cc/TKAnduril
Body: Aluminum with hard-coat anodizing
Switch: Electronic side switch
Ingress rating: Equivalent to IPX8
Battery: One flat-top or button-top high discharge (>10A) unprotected 18650 cell (max length 66mm). Battery is NOT included. 
Recommended batteries: Sanyo GA, Samsung 35E
Weight: ~76.5g (2.70oz) without battery 
Size: 27.8mm (1.09") head diameter, 93.9mm (3.70") length.

User interfaces and features: 
By default the EDC18 is set to use Smooth Ramping for mode changing
Direct access to turbo mode shortcut.
A more conventional Stepped Ramping UI is available if you prefer discrete modes level. (Number of steps is configurable)
Momentary mode useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
Muggle mode uses reduced output and features
Electronic lockout for safety and low momentary.

ANDURIL QUICK REFERENCE SHEET:

THE PINK HIGHLIGHTED AREA IS THE PATH TO CONFIGURE THE TEMPERATURE SENSOR

MANUFACTURED BY :

Lumintop

* Required Fields

$49.95